-
Drying Equipment
Calcination Equipment
Rotary Kiln
Rotary Kiln
-
Drying Equipment
Calcination Equipment
Rotary kiln is a horizontal cylindrical rotary drying/firing device, which is divided into direct heating type that supplies hot air and indirect heating type that heats the body according to the heat source supply method.
The direct heating type is categorized into counter current and co-current type according to the flow direction of hot air and materials.
The counter current rotary kiln has high thermal efficiency, but it is not suitable for materials with thermal deformation at the heating temperature.
The co-current rotary kiln has lower thermal efficiency compared to convection type, but it is more free from thermal deformation of materials.
HEATER | FEATURES | REFRACTORY | GAS FLOW |
---|---|---|---|
Direct Firing | High Efficiency | YES | Counter current rotary kiln (Counter current rotary kiln) |
Co-current rotary kiln (Co-current rotary kiln) |
|||
Indirect Firing | Low dust and precise temperature control |
NO | Cross-Flow rotary kiln (Cross-Flow rotary kiln) |
Basic Spec
SPEC | DESCRIPTION | |
---|---|---|
CAPACITY | MAX 500ton/day | |
SIZE | MAX ID3.5m x 60m | |
HEATING TEMPERATURE | 100°C-1550°C | |
RESIDENCE TIME | RPM | 0.18-2.2 |
INCLINE | -5°~+5° | |
RESIDENCE TIME | 15min-180min |
*The detailed specifications can be adjusted according to the customer's requirements
- Calcination : Limestone (Cement)
- Ore : Extraction lithium
- Smelting : Extraction rare metal
- Recycling : Recycle secondary battery, sludge
- Agriculture : Make fertilizer
Related Equipment
Calcination Equipment
GCD dryer(Grind Classifying Dryer) is a continuous flow drying equipment that simultaneously handles drying, grinding, and classification. It allows to control particle size of the material through the adjustment of the rotational speed of the grinding and classification units.
Calcination Equipment
The rotary cooler, which is a kind of cooler, is a cylinder type high efficiency rotating cooler. It is a furnace in which raw material is put into a rotary cylinder made of steel and directly cooled or indirectly cooled. It is mainly used to cool the product after chemical reaction or physical change by treating the material at high temperature.