Automatic Supplementary Material Feeder is a machine to inject raw materials into the molten steel of the ladle. A ladle car with raw material moves towards the fixed ladle and inject it.

Scrap bucket is a ladle-shaped equipment for transporting scrap. By contracting two segments on the bottom of the bucket, it opens the bottom in a clamshell-like shape to carry the scrap.

Ladle transfer car is a machine for transporting molten metal to steelmaking factory

Tundish is an equipment vessel used to store and continuously feed molten steel into the continuous casting mold from casting ladle.

Mould water jacket is a key equipment in continuous casting process by cooling the molten steel in the mold

Dummy bar is a molten steel guide that allows continuous casting at a constant speed without spilling molten steel.

Torch cutting machine is a cutting machine that operates as a continuous casting automation system (Key device of continuous casting process)

It is a guide installed on the entrance and exit roller of a rolling mill. It is mainly used for shape steel (such as angle, H-beam, channel, etc.).

4-crank shear is a machine that moving crank to cut off objects located at the intersection of a rotating shear.

Carriage transfer is an equipment used for transporting products located in the Cooling Bed area of a rolling factory. The products positioned on the Cooling Bed are horizontally transported to destination using a connected chain on the upper part of the transfer system.

Tilting machine is a machine which ladle filled with molten steel makes pour into tundish

This is an equipment for vertical transportation of bloom to the furnace. The bloom is placed on a bracket connected to the chain moves around the furnace when chain moves